Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Floor Frame

Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span.  5/8” thick tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists.  All joints sanded smooth & filled as necessary.

Wall Frame

Walls have 2” x 4” wood studs with single bottom & top plates.  Window & door lintels to suit openings.   ¼” thick rigid exterior wall sheathing securely fastened to studs.

Roof Frame

Structural wood roof joists to suit 20 lbs./sq.ft. roof storage load & span.  7/16” thick rigid roof sheathing securely fastened to roof joists.

Insulation

Floor -  2 ½”  fibreglass insulation (R8)

Walls - 2 ½”  fibreglass insulation (R8)

Roof - 2 ½”  fibreglass insulation (R8)

            6 mil - poly vapour barrier

Interior Finish

Floor- 1/8” thick 12” x 12” vinyl composite floor tile.  2 ½” vinyl baseboard.

Walls - easy care vinyl covered ½” thick gypsum board with colour matched vertical vinyl joint strips.  Flame spread rating 25.

Ceiling - Suspended system with metal tracks and non-combustible white acoustic tiles.  Flame spread rating 25.  Clear floor to ceiling height, approx. 7’5”.

Exterior Finish

Roof - 30 gauge Galvanized flat steel or EPDM rubber membrane.

Walls - 28 gauge Ribbed steel siding & trims with maintenance free baked enamel finish in a choice of 14 colours.

Underfloor -  1/4'' rigid sheathing glued and nailed to joists.

Base Supports

3 ½” x 8” x 1 ½” high painted wood supports (1 ½” clearance for forklift access).

Entrance Door

1 3/8” x 2’8” x 6’8” hollow core wood stab door in steel frame complete with 1 pair butt hinges, keyed lockset, sweep seal, threshold & check chain.

Framed sealed with butyl based sealant.

Windows & Vents

4’ wide x 3’ high aluminum frame single pane sliding glass windows.  Quantity and size may vary with layout.  Frames sealed with butyl based sealant.

Electrical

CSA approved fixtures, wired and inspected to electrical code.  Standard pre-wired electrical package includes surface mounted 1’ x 4’ fluorescent light fixtures with wrap-around acrylic lenses complete with switch and lamps.  Duplex electrical receptacles.  Exterior service entry conduit passes through wall for ease of hook-up to 15 amp 120 volt site service.  All wiring in concealed in walls and roof.  Check layout or quote for equipment capacities, quantities and location.

 

Specifications are subject to change without notice where required to enhance the value of our buildings.

  • Applications-INTERIOR PLANT OFFICES

    Office enclosures for in-plant areas or warehouse locations with moderate to low noise levels.  Provides a functional, attractive maintenance free work environment.

    Read More +
  • Product Specifications-INTERIOR PLANT OFFICES

    Floor Frame

    Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span.  5/8” thick tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists.  All joints… Read More +

  • Downloads-General Catalogue (PDF; 11.79MB)

  • 1
  • S14-1099  S14-1100   22