Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Floor Frame

Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span.  5/8” thick  tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists.  All joints sanded smooth & filled as necessary.

Wall Frame

Walls have 2” x 4” wood studs with single bottom plates & double top plates.  Door lintels to suit openings.  ¼” thick rigid exterior wall sheathing securely fastened to studs.

Roof Frame

Structural wood roof joists to suit 50lbs./sq.ft. roof storage load & span.  7/16” thick rigid roof sheathing securely fastened to roof joists.

Insulation

Floor -  3 ½” fibreglass insulation (R12)

Walls - 3 ½” fibreglass insulation (R12)

Roof -  5 ½” fibreglass insulation (R20)

                      6 mil poly vapour barrier

Interior Finish

Floor- 1/8” thick 12” x 12” vinyl composite floor tile.  2 ½” vinyl baseboard.

Walls - Easy care vinyl covered ½” thick gypsum board with colour matched vertical vinyl joint strips.  Flame spread rating 25.

Ceiling - Suspended system with metal tracks and non-combustible white acoustic tile.  Flame spread rating 25.  Clear floor to ceiling height, approx. 7’5”.

Exterior Finish

Roof - EPDM rubber membrane.

Walls - 28 gauge ribbed steel siding & trims with maintenance free baked enamel finish I a choice of 14 colours.

Underfloor - 1/4"  rigid sheathing glued and nailed to joists.

Entrance Door

1 ¾” x 3’0” x 6’8” steel insulated door pre-hung in frame, 1 ½ pair butt hinges, lockset, weather-stripping, noise & sweep seals, threshold and check chain.  Frame sealed with butyl based sealant.

Vents

Quantity & size may vary with layout.  Frames sealed with butyl based sealant. 

Electrical

CSA approved fixtures, wired and inspected to electrical code.  Standard pre-wired electrical package includes surface mounted 1’ x 4’ fluorescent light fixtures with wrap-around acrylic lenses complete with switch and lamps.  Duplex electrical receptacles.  Exterior service entry conduit passes through wall from breaker type service panel for ease of hook-up to 240 volt site service.  240 volt fixed baseboard heater with built-in thermostat.  Wall mounted exhaust fan with switch.  All wiring is concealed in walls and roof. 

Check layout or quote for equipment capacities, quantities and locations.

  • Overview-WASHROOM / SHOWER UNITS

    CPS washroom, shower units are completely pre-built and delivered to you through our Fast Track Scheduling System. 

    Unlike permanent structures, CPS units mean no construction delays and because the units are pre-piped, they simply… Read More +

  • Product Specifications-WASHROOM / SHOWER UNITS

    Floor Frame

    Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span.  5/8” thick  tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists.  All joints… Read More +

  • Options-WASHROOM / SHOWER UNITS

    • Sections can be 8 ft., 10 ft., 12 ft. or 14 ft. wide & up to 60 ft. long, linked in combinations to create large facilities

    • Wood or non-combustible steel framing systems

    • Style and quantity… Read More +

  • 1
  • washroomBig4
  • washroomBig3
  • washroomBig2
  • washroomBig1
  • washroomBig9