Structural wood floor joists and multi-ply beams to suit 50 lbs/sq.ft. floor loading and span. 5/8” thick panel T&G sub-floor fastened securely (glued and nailed for added strength) to floor joists. All joints are sanded smooth and filled as necessary.
Walls have 2” x 4” wood studs with single bottom plates and double top plates. Window and door lintels to suit opening ¼” thick rigid exterior wall sheathing securely fastened to studs.
Structural wood roof joists to suit 50 lbs/sq.ft. (min.) or local area ground snow load and span. 7/16” thick rigid roof sheathing fastened securely to roof joists.
Insulation (Fibreglass Blanket)
Floor - 6” fibreglass insulation (R20)
Walls - 3 ½” fibreglass insulation (R12)
Roof - 6” fibreglass insulation (R20)
6 mil poly vapour barrier
Floor - 1/8” x 12” x 12” vinyl composite floor tile. 2 ½” black vinyl baseboard.
Walls - Easy care vinyl covered ½” thick gypsum board with colour matched vertical vinyl joint strips. Flame spread rating 25.
Ceiling - Suspended system with metal tracks and 2’ x 4’ non-combustible white acoustic tile. Flame spread rating 25. Clear floor to ceiling height approximately 7’ 5”.
Roof - Galvanized steel or EPDM Rubber Membrane.
Walls - 29 ga. ribbed steel siding and trims with maintenance free baked enamel finish in a choice of colours.
Underfloor - 1/4” rigid sheathing glued and nailed to joists.
1 ¾” x 3’ 0’ x 6’ 8” steel insulated door pre-hung in frame complete with 20” x 32” insulglass light. 1 ½” pair butt hinges, keyed lockset, weatherstripping, sweep seals, threshold and check chain. Frame sealed with butyl based sealant.
Windows & Vents
Aluminum frame windows – thermally broken. Fixed or sliding insulglass lights. Quantity and size varies with layout. Frames sealed with butyl based sealant. Insulated air intake vent complete with gravity operated louvres.
Walk-through models include 24” wide counter with lift-up top.
CSA approved fixtures. Wired to electrical code and Ontario Hydro inspected. Standard pre-wired electrical package includes surface mounted 1’ x 4’ fluorescent light fixtures with acrylic plastic lens complete with switch and lamps. Duplex electrical receptacles. Exterior service entry conduit passes through wall for ease of hook-up to breaker type circuit panel with main & branch breakers. 240 volt fixed baseboard heater with built-in thermostat. All wiring concealed in walls and roof. Check layout or quote for equipment capacities, quantities and locations.
Steel Base Supports
Tubular steel 3” x 8” x 2” high steel supports (2” clearance for fork truck lifting access).
OCCUPANCY 8+ HOUR STRUCTURES - Please Contact our Sales Team for Further Information & a Quote!