1 ¾” x 3’0” x 6’8” steel insulated door pre-hung in wood frame complete with 20” x 32” insulglass light, 1 ½ pair butt hinges, keyed lockset, weatherstripping, noise & sweep seals, threshold and check chain. Frame sealed with butyl based sealant.
Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span. 5/8” thick tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists. All joints sanded smooth & filled as necessary.
Walls have 2” x 4” wood studs with single bottom plates & double top plates. Window & door lintels to suit openings. ¼” thick rigid exterior wall sheathing securely fastened to studs.
Structural wood roof joists to suit 50lbs./sq.ft. roof storage load & span. 7/16” thick rigid roof sheathing securely fastened to roof joists.
3” x 8” x 2” high painted tubular steel supports. (2” clearance for fork lift access).
Floor – 3 ½” fibreglass insulation (R12)
Walls – 3 ½” fibreglass insulation (R12)
Roof – 5 ½” fibreglass insulation (R20)
6 mil poly vapour barrier
Floor– 1/8” thick 12” x 12” vinyl composite floor tile. 2 ½” vinyl baseboard.
Walls – Easy care vinyl covered ½” thick gypsum board with colour matched vertical vinyl joint strips. Flame spread rating 25.
Ceiling – Suspended system with metal tracks and non-combustible white acoustic tile. Flame spread rating 25. Clear floor to ceiling height, approx. 7’5”.
Roof – 30 gauge galvanized flat steel or EPDM rubber membrane.
Walls – 28 gauge ribbed steel siding & trims with maintenance free baked enamel finish I a choice of 14 colours.
Underfloor – 1/4″ rigid sheathing glued and nailed to joists.
1 ¾” x 3’0” x 6’8” steel insulated door pre-hung in wood frame complete with 20” x 32” insulglass light, 1 ½ pair butt hinges, keyed lockset, weatherstripping, noise & sweep seals, threshold and check chain. Frame sealed with butyl based sealant.
4’0” wide x 3’6” high aluminum frame windows. Fixed insulglass units. Quantity & size may vary with layout. Frames sealed with butyl based sealant. Air intake vent complete with gravity operated louvers.
CSA approved fixtures, wired and inspected to electrical code. Standard pre-wired electrical package includes surface mounted 1’ x 4’ fluorescent light fixtures with wrap-around acrylic lenses complete with switch and lamps. Duplex electrical receptacles. Exterior service entry conduit passes through wall from breaker type service panel for ease of hook-up to 240 volt site service. 240 volt fixed baseboard heater with built-in thermostat. Wall mounted exhaust fan with switch. All wiring is concealed in walls and roof. Check layout or quote for equipment capacities, quantities and locations.
Office enclosures for in-plant high noise areas or exterior plant locations. Providing for an attractive, maintenance free working environment.
Structural wood floor joists and multi-ply beams to suit 50 lbs./sq.ft. floor loading and span. 5/8” thick tongue & groove panel sub-floor fastened securely (glued & nailed) to floor joists. All joints
General Catalogue (PDF; 3.41MB)